Artistic 2.0 and GPLv2 and GPLv2+ and LGPLv2+ and LPPL-1.3a and LPPL-1.3c and MIT and Public Domain and UCD and Utopia
ASL 2.0 and LGPL-2.1-only and Zlib and OFL-1.1 and Public Domain and LGPL-2.0-only and GPLv2+ and MPL-1.1 and Libpng and LGPL-3.0-only and BSL-1.0 and GPLv2 and GPLv3 and CPL-1.0 and IJG and MIT and LPPL-1.3c and ICU and psutils
This is a very small font set that contain some symbols useful in linear logic, which are apparently not available elsewhere. Variants are included for use with Computer Modern serif and sans-serif and with the AMS Euler series. The font is provided both as Metafont source, and in Adobe Type 1 format. LaTeX support is provided.
acquired package info from repodata DB: repodata/f1f85c23079e7764ad00378a9fc5d660b89a03657290e75426caf7be5b7da462-primary.sqlite.bz2
A set of symbol fonts, written in Metafont, offering (respectively) clock-face symbols, geometrical symbols, weather symbols, mountaineering symbols, electronic circuit symbols and a set of miscellaneous symbols. A LaTeX package is provided, that allows the user to load only those symbols needed in a document.
Bodoni's Greek fonts in the 18th century broke, for the first time, with the Byzantine cursive tradition of Greek fonts. GFS Bodoni resurrects his work for general use. The font family supports both Greek and Latin letters. LaTeX support of the fonts is provided, offering OT1, T1 and LGR encodings. The fonts themselves are provided in Adobe Type 1 and OpenType formats.
This is a set of book-hand (MetaFont) fonts and packages covering manuscript scripts from the 1st century until Gutenberg and Caxton. The included hands are: Square Capitals (1st century onwards); Roman Rustic (1st-6th centuries); Insular Minuscule (6th cenury onwards); Carolingian Minuscule (8th-12th centuries); Early Gothic (11th-12th centuries); Gothic Textura Quadrata (13th-15th centuries); Gothic Textura Prescisus vel sine pedibus (13th century onwards); Rotunda (13- 15th centuries); Humanist Minuscule (14th century onwards); Uncial (3rd-6th centuries); Half Uncial (3rd-9th centuries); Artificial Uncial (6th-10th centuries); and Insular Majuscule (6th-9th centuries).
Provides fonts (both as Metafont source and in Adobe Type 1 format) based on the capitals carved on the Trajan column in Rome in 114 AD, together with macros to access the fonts. Many typographers think these rank first among the Roman's artistic legacy. The font is uppercase letters together with some punctuation and analphabetics; no lowercase or digits.
Metafont source for OCR-B at several sizes.
The font (defined in Metafont) defines a single character, a black solid skull. A package is supplied to make this character available as a symbol in maths mode.
Extensions, originally to the CM fonts, providing a parameterization scheme to build Metafont fonts at true design sizes, for a large range of sizes. The scheme has now been extended to a range of other fonts, including the AMS fonts, bbm, bbold, rsfs and wasy fonts.
Fonts for typesetting in Church Slavonic language
The package provides Unicode-encoded OpenType fonts for Church Slavonic.
Use SourceCodePro with TeX(-alike) systems
The font is an open-source Monospaced development from Adobe. The package provides fonts (in both Adobe Type 1 and OpenType formats) and macros supporting their use in LaTeX (Type 1) and XeLaTeX/LuaLaTeX (OTF).
The package deals with EAN barcodes; Metafont sources for fonts are provided, and a set of examples; for some codes, a small Perl script is needed.
Old German-style fonts, in Adobe type 1 format
This package comprises type 1 versions of the Gothic, Schwabacher and Fraktur fonts of Yannis Haralambous' set of old German fonts.
The package contains LaTeX support for the DejaVu fonts, which are derived from the Vera fonts but contain more characters and styles. The fonts are included in the original TrueType format, and in converted Type 1 format. The (currently) supported encodings are: OT1, T1, IL2, TS1, T2*, X2, QX, and LGR. The package doesn't (currently) support mathematics. More encodings and/or features are expected.
The NeoHellenic style evolved in academic circles in the 19th and 20th century; the present font follows a cut commissioned from Monotype in 1927. The present version was provided by the Greek Font Society. The font supports both Greek and Latin characters, and has been adjusted to work well with the cmbright fonts for mathematics support. LaTeX support of the fonts is provided, offering OT1, T1 and LGR encodings.
The Scientific and Technical Information eXchange (STIX) fonts are intended to satisfy the demanding needs of authors, publishers, printers, and others working in the scientific, medical, and technical fields. They combine a comprehensive Unicode-based collection of mathematical symbols and alphabets with a set of text faces suitable for professional publishing. The fonts are available royalty-free under the SIL Open Font License.
Fonts to typeset with the xgreek package
The UMTypewriter font family is a monospaced font family that was built from glyphs from the CB Greek fonts, the CyrTUG Cyrillic alphabet fonts ("LH"), and the standard Computer Modern font family. It contains four OpenType fonts which are required for use of the xgreek package for XeLaTeX.
Computer Modern Unicode fonts, converted from Metafont sources using mftrace with autotrace backend and fontforge. Some characters in several fonts are copied from Blue Sky type 1 fonts released by AMS. Currently the fonts contain glyphs from Latin (Metafont ec, tc, vnr), Cyrillic (lh), Greek (cbgreek when available) code sets and IPA extensions (from tipa). This font set contains 33 fonts. This archive contains AFM, PFB and OTF versions; the OTF version of the Computer Modern Unicode fonts works with TeX engines that directly support OpenType features, such as XeTeX and LuaTeX.
A symbol (dingbat) font and LaTeX macros for its use
A symbol font (distributed as Metafont source) that contains many of the symbols of the Zapf dingbats set, together with an NFSS interface for using the font. An Adobe Type 1 version of the fonts is available in the niceframe fonts bundle.
FdSymbol is a maths symbol font, designed as a companion to the Fedra family by Typotheque, but it might also fit other contemporary typefaces.
A geometric sans serif blackboard bold font, for use in mathematics; Metafont sources are provided, as well as macros for use with LaTeX. The Sauter font package has Metafont parameter source files for building the fonts at more sizes than you could reasonably imagine. See the blackboard sampler for a feel for the font's appearance.
An implementation of the universal font by Herbert Bayer of the Bauhaus school. The Metafont sources of the fonts, and their LaTeX support, are all supplied in a LaTeX documented source (.dtx) file.
Support for the Danish "Dania" phonetic system
Fonetika Dania is a font bundle with a serif font and a sans serif font for the danish phonetic system Dania. Both fonts exist in regular and bold weights. LaTeX support is provided. The fonts are based on URW Palladio and Iwona Condensed, and were created using FontForge.
Alternative unslanted italic Computer Modern fonts
This is a demonstration of the use of virtual fonts for unusual effects: the package implements an old idea of Eric Gill. The package was written for the author's talk at TUG 2010.
This package provides LaTeX support for the included "Font Awesome 5 Free" icon set. These icons were designed by Fort Awesome and released under the SIL OFL 1.1 license. The commercial "Pro" version is also supported, if it is installed and XeLaTeX or LuaLaTeX is used.
The DANTE font for the logo of DANTE (http://www.dante.de), the German speaking TeX users group. The font includes only the five characters d, a, n, t, and e. dantelogo.sty provides an interface for LuaLaTeX/XeLaTeX/pdfLaTeX.
A family of sans serif fonts for TeX and LaTeX, based on Donald Knuth's CM fonts. It comprises OT1, T1 and TS1 encoded text fonts of various shapes as well as all the fonts necessary for mathematical typesetting, including AMS symbols. This collection provides all the necessary files for using the fonts with LaTeX. A commercial-quality Adobe Type 1 version of these fonts is available from Micropress. Free versions are available, in the cm-super font bundle (the T1 and TS1 encoded part of the set), and in the hfbright package (the OT1 encoded part, and the maths fonts).
Fourier-GUTenberg is a LaTeX typesetting system which uses Adobe Utopia as its standard base font. Fourier-GUTenberg provides all complementary typefaces needed to allow Utopia based TeX typesetting, including an extensive mathematics set and several other symbols. The system is absolutely stand- alone: apart from Utopia and Fourier, no other typefaces are required. The fourier fonts will also work with Adobe Utopia Expert fonts, which are only available for purchase. Utopia is a registered trademark of Adobe Systems Incorporated
This package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the NotoSerif and NotoSans families of fonts, designed by Steve Matteson for Google.
A Greek font with normal and bold variants
This is a Greek font written in Metafont, with inspiration from the Bodoni typefaces in old books. It is stylistically a little more exotic than the standard textbook Greek fonts, particularly in glyphs like the lowercase rho and kappa. It aims for a rather calligraphic feel, but seems to blend well with Computer Modern. There is a ligature scheme which automatically inserts the breathings required for ancient texts, making the input text more readable than in some schemes.
Mathabx is a set of 3 mathematical symbols font series: matha, mathb and mathx. They are defined by Metafont code and should be of reasonable quality (bitmap output). Things change from time to time, so there is no claim of stability (encoding, metrics, design). The package includes Plain TeX and LaTeX support macros. A version of the fonts, in Adobe Type 1 format, is also available.
GFS Artemisia is a relatively modern font, designed as a 'general purpose' font in the same sense as Times is nowadays treated. The present version has been provided by the Greek Font Society. The font supports the Greek and Latin alphabets. LaTeX support is provided, using the OT1, T1 and LGR encodings.
A collection of fonts that reproduce those used in "old German" printing and handwriting. The set comprises Gothic, Schwabacher and Fraktur fonts, a pair of handwriting fonts, Sutterlin and Schwell, and a font containing decorative initials. In addition, there are two re-encoding packages for Haralambous's fonts, providing T1, using virtual fonts, and OT1 and T1, using Metafont.
The directory contains a copy of the Type 1 font "URW Grotesq 2031 Bold' released under the GPL by URW, with supporting files for use with (La)TeX.
LaTeX support for Cinzel and Cinzel Decorative fonts
Cinzel and Cinzel Decorative fonts, designed by Natanael Gama Natanael Gama), find their inspiration in first century roman inscriptions, and are based on classical proportions. Cinzel is all-caps (similar to Trajan and Michelangelo), but is available in three weights (Regular, Bold, Black). There are no italic fonts, but there are Decorative variants, which can be selected by the usual italic-selection commands in the package's LaTeX support.
Mathematical alphabets derived from the STIX fonts
The package contains a number of PostScript fonts derived from the STIX OpenType fonts, that may be used in maths mode in regular and bold weights for calligraphic, fraktur and double- struck alphabets. Virtual fonts with metrics suitable for maths mode are provided, as are LaTeX support files.
Font package derived from Heuristica and Utopia
Erewhon is based on the Heuristica package, which is based in turn on Utopia. Erewhon adds a number of new features -- small caps in all styles rather than just regular, added figure styles (proportional, inferior, numerator, denominator) and superior letters. The size is 6% smaller than Heuristica, matching that of UtopiaStd.
A font with the images of the countries of Europe
The bundle provides a font "CountriesOfEurope" (in Adobe Type 1 format) and the necessary metrics, together with LaTeX macros for its use. The font provides glyphs with a filled outline of the shape of each country; each glyph is at the same cartographic scale.
A LaTeX package for configuring presentation fonts
This package aims to improve of font readability in presentations, especially with maths. The standard cm maths fonts at large design sizes are difficult to read from far away, especially at low resolutions and low contrast color choice. Using this package leads to much better overall readability of some font combinations. The package offers a couple of 'harmonising' combinations of text and maths fonts from the (distant) relatives of computer modern fonts, with a couple of extras for optimising readability. Text fonts from computer modern roman, computer modern sans serif, SliTeX computer modern sans serif, computer modern bright, or concrete roman are available, in addition to maths fonts from computer modern maths, computer modern bright maths, or Euler fonts. The package is part of the TeXPower bundle.
Fonts and LaTeX support files for Arev Sans
The package arev provides type 1 and virtual fonts, together with LaTeX packages for using Arev Sans in both text and mathematics. Arev Sans is a derivative of Bitstream Vera Sans created by Tavmjong Bah, adding support for Greek and Cyrillic characters. Bah also added a few variant letters that are more appropriate for mathematics. The primary purpose for using Arev Sans in LaTeX is presentations, particularly when using a computer projector. In such a context, Arev Sans is quite readable, with large x-height, "open letters", wide spacing, and thick stems. The style is very similar to the SliTeX font lcmss, but heavier. Arev is one of a very small number of sans- font mathematics support packages. Others are cmbright, hvmath and kerkis.
German "school scripts" from Suetterlin to the present day
Das Paket enthalt im wesentlichen die METAFONT-Quellfiles fur die folgenden Schulausgangsschriften: Suetterlinschrift, Deutsche Normalschrift, Lateinische Ausgangsschrift, Schulausgangsschrift, Vereinfachte Ausgangsschrift. Damit ist es moglich, beliebige deutsche Texte in diesen Schreibschriften zu schreiben.
The TeX Live software distribution offers a complete TeX system for a variety of Unix, Macintosh, Windows and other platforms. It encompasses programs for editing, typesetting, previewing and printing of TeX documents in many different languages, and a large collection of TeX macros and font libraries. The distribution includes extensive general documentation about TeX, as well as the documentation for the included software packages.
The collection contains fonts to represent Aramaic, Cypriot, Etruscan, Greek of the 6th and 4th centuries BCE, Egyptian hieroglyphics, Linear A, Linear B, Nabatean old Persian, the Phaistos disc, Phoenician, proto-Semitic, runic, South Arabian Ugaritic and Viking scripts. The bundle also includes a small font for use in phonetic transcription of the archaic writings. The bundle's own directory includes a font installation map file for the whole collection.
Calligraphic font for typesetting handwriting
A calligraphic font for simulating American-style informal handwriting. The font is distributed in Adobe Type 1 format.
Blackboard variants of Computer Modern fonts. The fonts are distributed as Metafont source (only); LaTeX support is available with the bbm-macros package. The Sauter font package has Metafont parameter source files for building the fonts at more sizes than you could reasonably imagine. A sample of these fonts appears in the blackboard bold sampler.
An approximate equivalent of the Xerox Pica typeface; the font is optimised for submitting fiction manuscripts to mainline publishers. The font is a fixed-width one, rather less heavy than Computer Modern typewriter. Emphasis for bold-face comes from a wavy underline of each letter. The two fonts are supplied as Metafont source.
LaTeX support for Hoenig's Computer Duerer fonts, using their standard fontname names.
The cmtiup fonts address a problem with the appearance of punctuation in italic text in mathematical documents. To achieve this, all punctuation characters are upright, and kerning between letters and punctuation is adjusted to allow for the italic correction. The fonts are implemented as a set of vf files; a package for support in LaTeX 2e is provided.
An Adobe Type 1 format version of the bbold font
The files offer an Adobe Type 1 format version of the 5pt, 7pt and 10pt versions of the bbold fonts. The distribution also includes a map file, for use when incorporating the fonts into TeX documents; the macros provided with the original Metafont version of the font serve for the scaleable version, too. The fonts were produced to be part of the TeX distribution from Y&Y; they were generously donated to the TeX Users Group when Y&Y closed its doors as a business.
This package implements PFB font which is accessible normally by Sauter extrapolation only as bitmap font.
Improved quantifier stroke for Begriffsschrift packages
The font contains a single character: the Begriffsschrift quantifier (in several sizes), as used to set the Begriffsschrift (concept notation) of Frege. The font is not intended for end users; instead it is expected that it will be used by other packages which implement the Begriffsschrift. An (unofficial) modified version of Josh Parsons' begriff is included as an example of implementation.
Support files for Nimbus 2015 Core fonts
The Nimbus 2015 Core fonts added Greek and Cyrillic glyphs. This package may be best suited as an add-on the a comprehensive Times package, providing support for Greek and Cyrillic. A new intermediate weight of NimbusMono (AKA Courier) is provided, along with a narrower version which may be useful for rendering code.
A complete set of fonts for text and mathematics
The family contains text fonts in roman, sans-serif and monospaced shapes, with true small caps and old-style numbers; the package offers full support of the textcomp package. The mathematics fonts include all the AMS fonts, in both normal and bold weights. Each of the font types is available in two main versions: default and 'light'. Each version is available in four variants: default; oldstyle numbers; oldstyle numbers with old ligatures such as ct and st, and long-tailed capital Q; and veryoldstyle with long s. Other variants include small caps as default or 'large small caps', and for mathematics both upright and slanted shapes for Greek letters, as well as default and narrow versions of multiple integrals. The fonts were originally derived from URW Palladio (with URW's agreement) though the fonts are very clearly different in appearance from their parent.
LaTeX support for EBGaramond fonts in mathematics
This package provides some LaTeX support for the use of EBGaramond12 in mathematics. It is based on, and requires, ebgaramond. The package was created in response to a question at TeX-stackexchange. and tested in the form of an answer in the same forum.
Playfair Display fonts with LaTeX support
Playfair Display is well suited for titling and headlines. It has an extra large x-height and short descenders. It can be set with no leading if space is tight, for instance in news headlines, or for stylistic effect in titles. Capitals are extra short, and only very slightly heavier than the lowercase characters. This helps achieve a more even typographical colour when typesetting proper nouns and initialisms.
The well-known Euler fonts are suitable for typsetting mathematics in conjunction with a variety of text fonts which do not provide mathematical character sets of their own. Euler- VM is a set of virtual mathematics fonts based on Euler and CM. This approach has several advantages over immediately using the real Euler fonts: Most noticeably, less TeX resources are consumed, the quality of various math symbols is improved and a usable \hslash symbol can be provided. The virtual fonts are accompanied by a LaTeX package which makes them easy to use, particularly in conjunction with Type1 PostScript text fonts. They are compatible with amsmath. A package option allows the fonts to be loaded at 95% of their nominal size, thus blending better with certain text fonts, e.g., Minion.
Correct placement of accents in sans-serif maths
Sans serifsmall caps and math fonts for use with Computer Modern.
The package supports typesetting hacm, the alphabet of the constructed language Arka. The bundle provides nine official fonts, in Adobe Type 1 format.
Capital A and capital R ligature for Aspect Ratio
The package provides fonts (both as Adobe Type 1 format, and as Metafont source) for the 'AR' symbol (for Aspect Ratio) used by aeronautical scientists and engineers. Note that the package supersedes the package ar
Libertine add-on to support Greek and Cyrillic
The package provides LaTeX support files to access the Greek and Cyrillic glyphs in LinuxLibertine. It functions as an add- on to the libertine package, using filenames and macro names that are compatible with that package. Supported encodings: LGR, T2A, T2B, T2C, OT2.
This package, derived from TemporaLGCUni by Alexej Kryukov, is meant as a companion to Times text font packages, providing Greek and Cyrillic in matching weights and styles. OpenType and Type1 fonts are provided, with LaTeX support files giving essentially complete LGR coverage of monotonic, polytonic and ancient Greek, and almost full T2A coverage of Cyrillic.
Font containing icons of online academic profiles
This package provides access in (La)TeX to 20 high quality icons of online academic profiles included in the free "Academicons" font. It requires the fontspec package and either the Xe(La)TeX or the Lua(La)TeX engine to load the included academicons.ttf font. The "Academicons" font was designed by James Walsh and released (see http://jpswalsh.github.io/academicons/) under the SIL Open Font License. This package is inspired by and based on the fontawesome package. academicons.sty provides the generic \aiicon command to access icons, which takes as a mandatory argument the name of the desired icon. It also provides individual direct commands for each specific icon. The full list of icons and their respective names and direct commands can be found in the manual.
SticksToo is a reworking of the STIX2 with support files focussing on enhancements of support for LaTeX users wishing to be able to access more of its features. A companion addition to the newtxmath package (version 1.55) provides a matching math package using STIX2 letters (Roman and Greek) with newtxmath symbols.
This package supports the free otf fonts from the IBM Plex project which are available from GitHub or already part of your system (Windows/Linux/...). This package supports only XeLaTeX or LuaLaTeX; for pdfLaTeX use plex-mono.sty, plex-sans.sty, and/or plex-serif.sty from the plex package. IBM Plex has no math symbols. You will have to use one of the existing math fonts if you need them.
Comfortaa is a sans-serif font, comfortable in every aspect, designed by Johan Aakerlund. The font, which includes three weights (thin, regular and bold), is available on Johan's deviantArt web page as TrueType files under the Open Font License version 1.1. This package provides support for this font in LaTeX, and includes both the TrueType fonts, and conversions to Adobe Type 1 format.
These fonts represent semaphore in a highly schematic, but very clear, fashion. The fonts are provided as Metafont source, and in both OpenType and Adobe Type 1 formats.
Arabic-Latin Modern Fixed extends TeX-Gyre Latin Modern Mono 10 Regular to full Arabic Unicode support
Arabic-Latin Modern Fixed is an extension of TeX-Gyre Latin Modern Mono 10 Regular. Every glyph and opentype feature of the Latin Modern Mono has been retained, with minor improvements. On the other hand, we have changed the vertical metrics of the font. Although the Arabic script is designed to use the same x- size as Latin Modern Mono, the former script needs greater ascender and descender space. Every Arabic glyph in each Unicode-code block is supported (up to Unicode 7.0): Arabic, Arabic Supplement, Arabic Extended, Arabic Presentation-Forms A, and Arabic Presentation-Forms B. There are two versions of the font: otf and ttf. The opentype version is for print applications (and usually the default for TeX). The TrueType version is for on-screen applications such as text editors. Hinting in the ttf version is much better for on-screen, at least on Microsoft Windows. The unique feature of Arabic-Latin Modern is its treatment of vowels and diacritics. Each vowel and diacritic (ALM Fixed contains a total of 68 such glyphs) may now be edited horizontally within any text editor or processor. The author believes this is the very first opentype Arabic font ever to have this capability. Editing complex Arabic texts will now be much easier to input and to proofread.
The KIX code is a barcode-like format used by the Dutch PTT to encode country codes, zip codes and street numbers in a machine- readable format. If printed below the address line on bulk mailings, a discount can be obtained. The font is distributed in Metafont format, and covers the numbers and upper-case letters.
A humanist Sans Serif font, with LaTeX support
Cabin is a humanist sans with four weights and true italics and small capitals. According to the designer, Pablo Impallari, Cabin was inspired by Edward Johnston's and Eric Gill's typefaces, with a touch of modernism. Cabin incorporates modern proportions, optical adjustments, and some elements of the geometric sans. cabin.sty supports use of the font under LaTeX, pdfLaTeX, xeLaTeX and luaLaTeX; it uses the mweights, to manage the user's view of all those font weights. An sfdefault option is provided to enable Cabin as the default text font. The fontaxes package is required for use with [pdf]LaTeX.
This package provides the script used in the works of the Beuron art school for use with TeX and LaTeX. It is a monumental script consisting of capital letters only. The fonts are provided as Metafont sources, in the Type1 and in the OpenType format. The package includes suitable font selection commands for use with LaTeX.
Provides a symbol set for describing relations between ordered pairs
Around 2008, researcher Byron Cook and several colleagues began developing a new set of interrelated algorithms capable of automatically reasoning about the behavior of computer programs and other systems (such as biological systems, circuit designs, etc). At the center of these algorithms were new ideas about the relationships between structures expressable as mathematical sets and relations. Using the language of mathematics and logic, the researchers communicated these new results to others in their community via published papers, research talks, etc. Unfortunately, they found the symbols already available for reasoning about relations lacking (in contrast to sets, which have a long-ago developed and robust symbol vocabulary). Early presentations were unnecessarily cluttered. To more elegantly express these ideas around relations, Cook recruited artist Tauba Auerbach to help develop a set of symbols. This package provides an math symbol font for describing relations between ordered pairs by using Metafont.
This is an Adobe Type 1 outline version of the mathabx fonts.
Enhancement of typewriter fonts from newtx
The package provides enhanced fonts with LaTeX support files providing access to the typewriter fonts from newtx. Regular and bold weights, slanted variants and a choice of four different styles for zero.
A reworking of ESSTIX13, adding a bold version
This package reworks the mathematical calligraphic font ESSTIX13, adding a bold version. LaTeX support files are included. The new fonts may also be accessed from the most recent version of mathalfa. The fonts themselves are subject to the SIL OPEN FONT LICENSE, version 1.1.
This single-character font is provided as Metafont source, and in Adobe Type 1 format. It is accompanied by a trivial LaTeX package to use the logo at various sizes.
Antykwa Torunska: a Type 1 family of a Polish traditional type
Antykwa Torunska is a serif font designed by the late Polish typographer Zygfryd Gardzielewski, reconstructed and digitized as Type 1.
The STIX fonts are a suite of unicode OpenType fonts containing a complete set of mathematical glyphs. The CTAN package is a copy of the fonts' official release, organised as specified by the TeX Directory Structure, for inclusion in standard TeX distributions. A Type 1-only distribution of the fonts is available in the esstix bundle.
The font was generated from a MetaPost version of the sources of the 'original' punk font. Knuth's original fonts generated different shapes at random. This isn't actually possible in an OpenType font; rather, the font contains several variants of each glyph, and uses the OpenType randomize function to select a variant for each invocation.
For each font, at least an .pfb and .tfm file is provided, with a .fd file for use with LaTeX.
Calligraphic fonts for use with LaTeX in T1 encoding
The package that implements a set (AuriocusKalligraphicus) of three calligraphic fonts derived from the author's handwriting in Adobe Type 1 Format, T1 encoding for use with LaTeX: Auriocus Kalligraphicus; Lukas Svatba; and Jana Skrivana. Each font features oldstyle digits and (machine-generated) boldface and slanted versions. A variant of Lukas Svatba offers a 'long s'.
A font offering the new (Indian) Rupee symbol
The package provides LaTeX support for the (Indian) Rupee symbol font, created by TechFat. The original font has been converted to Adobe Type 1 format, and simple LaTeX support written for its use.
A font for Frege's Grundgesetze der Arithmetik
The fonts are provided as Metafont source and Adobe Type 1 (pfb) files. A small LaTeX package (fge) is included.
The package provides Arkandis foundry's ArrowsADF and BulletsADF fonts in Adobe Type 1 format, together with TeX/LaTeX support files. The fonts are licensed under GPL v2 or later with font exception. (See NOTICE, COPYING, README.) The TeX/LaTeX support is licensed under LPPL. (See README, manifest.txt.)
Fonts extending Utopia, with LaTeX support files
The fonts extend the utopia set with Cyrillic glyphs, additional figure styles, ligatures and Small Caps in Regular style only. Macro support, and maths fonts that match the Utopia family, are provided by the Fourier and the Mathdesign font packages.
A hand-writing font in the style of the French academic running- hand. The font was written in Metafont and and has been converted to Adobe Type 1 format. LaTeX support (NFFS fd files, and a package) and font maps are provided.
Junicode is a TrueType font with many OpenType features for antiquarians (especially medievalists) based on typefaces used by the Oxford Press in the late 17th and early 18th centuries. It works well with Xe(La)TeX.
Sans serif maths (produced by the beamer class or the sfmath package) often has accents positioned incorrectly. The package fixes the positioning of such accents when the default font (cmssi) is used for sans serif maths.
A complete family of fonts written in Metafont
The package provides access to the DRM (Don's Revised Modern) family of fonts, which includes a variety of optical sizes in Roman (in four weights), italic, and small caps, among other shapes, along with a set of symbols and ornaments. It is intended to be a full-body text font, but its larger sizes can also be used for simple display purposes, and its significant body of symbols can stand on its own. It comes complete with textual ("old-style") and lining figures, and even has small- caps figures. It also comes with extensible decorative rules to be used with ornaments from itself or other fonts, along with an extremely flexible ellipsis package.
The package offers access to the large number of web-related icons provided by the included font. The package requires the package, fontspec, if run with XeTeX or LuaTeX.
The Y&Y 'texnansi' (TeX and ANSI, for Microsoft interpretations of ANSI standards) encoding lives on, even after the decease of the company; it is known in the LaTeX scheme of things as LY1 encoding. This bundle includes metrics and LaTeX macros to use the basic three (Times, Helvetica and Courier) Adobe Type 1 fonts in LaTeX using LY1 encoding.
This package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the Caladea family of fonts, designed by Carolina Giovagnoli and Andres Torresi of the Huerta Tipografica foundry and adopted by Google for ChromeOS as a font-metric compatible replacement for Cambria.
Artificial Uncial font and LaTeX support macros
The auncial-new bundle provides packages and fonts for a script based on the Artificial Uncial manuscript book-hand used between the 6th & 10th century AD. The script consists of minuscules and digits, with some appropriate period punctuation marks. Both normal and bold versions are provided, and the font is distributed in Adobe Type 1 format. This is an experimental new version of the auncial bundle, which is one of a series of bookhand fonts. The font follows the B1 encoding developed for bookhands. Access to the encoding is essential. The encoding mainly follows the standard T1 encoding.
Adobe Type 1 format of Carolingian Minuscule fonts
The bundle offers Adobe Type 1 format versions of Peter Wilson's Carolingian Minuscule font set (part of the bookhands collection). The fonts in the bundle are ready-to-use replacements for the Metafont originals.
Iwona is a two-element sans-serif typeface. It was created as an alternative version of the Kurier typeface, which was designed in 1975 for a diploma in typeface design at the Warsaw Academy of Fine Arts under the supervision of Roman Tomaszewski. This distribution contains a significantly extended set of characters covering the following modern alphabets: latin (including Vietnamese), Cyrillic and Greek as well as a number of additional symbols (including mathematical symbols). The fonts are prepared in Type 1 and OpenType formats. For use with TeX the following encoding files have been prepared: T1 (ec), T2 (abc), and OT2--Cyrillic, T5 (Vietnamese), OT4, QX, texansi and nonstandard (IL2 for the Czech fonts), as well as supporting macros and files defining fonts for LaTeX.
These are Adobe Type 1 versions of the OT1-encoded and maths parts of the Computer Modern Bright fonts.
A Unicode font, with rather wide coverage
The package provides a set of outline (i.e. OpenType) fonts covering as much as possible of the Unicode character set. The set consists of three typefaces: one monospaced and two proportional (one with uniform and one with modulated stroke).
The MFizz font provides scalable vector icons representing programming languages, operating systems, software engineering, and technology. It can be seen as an extension to FontAwesome. This package requires the fontspec package and either the Xe(La)TeX or Lua(La)TeX engine to load the included ttf font.
The Alegreya fonts are designed by Juan Pablo del Peral for Huerta Tipografica. Alegreya is a typeface originally intended for literature. It conveys a dynamic and varied rhythm which facilitates the reading of long texts. The italic has just as much care and attention to detail in the design as the roman. Bold, black, small caps and five number styles are available.
Alternative uses of the PX fonts, with improved metrics
This package, initially based on pxfonts, provides many fixes and enhancements to that package, and splits it in two parts (newpxtext and newpxmath) which may be run independently of one another. It provides scaling, improved metrics, and other options. For proper operation, the packages require that the packages newtxmath, pxfonts, and TeXGyrePagella be installed and their map files enabled.
This package provides LaTeX, pdfLaTeX, XeLaTeX, and LuaLaTeX support for the Crimson family of fonts, designed by Sebastian Kosch. The Crimson family is for book production in the tradition of beautiful oldstyle typefaces, inspired particularly by the work of people like Jan Tschichold (Sabon), Robert Slimbach (Arno, Minion), and Jonathan Hoefler (Hoefler Text). Support for small caps and old-style numerals is still "under construction"; these features are not supported by this version of the package.
Feyn may be used to produce relatively simple Feynman diagrams within equations in a LaTeX document. While the feynmf package is good at drawing large diagrams for figures, the present package and its fonts allow diagrams within equations or text, at a matching size. The fonts are distributed as Metafont source, and macros for their use are also provided.
The package provides the Raleway family in an easy to use way. For XeLaTeX and LuaLaTeX users the original OpenType fonts are used. The entire font family is included.
Typeset documents using base twelve numbering (also called "dozenal")
The package supports typesetting documents whose counters are represented in base twelve, also called "dozenal". It includes a macro by David Kastrup for converting positive whole numbers to dozenal from decimal (base ten) representation. The package also includes a few other macros and redefines all the standard counters to produce dozenal output. Fonts, in Roman, italic, slanted, and boldface versions, provide ten and eleven (the Pitman characters preferred by the Dozenal Society of Great Britain). The fonts were designed to blend well with the Computer Modern fonts, and are available both as Metafont source and in Adobe Type 1 format.
The package presents an extension of Bitstream Charter, which provides small caps, oldstyle figures and superior figures in all four styles, accompanied by LaTeX font support files. The fonts themselves are provided in both Adobe Type 1 and OTF formats, with supporting files as necessary.
Use of Linux Libertine and Biolinum fonts with LaTeX
The package provides the Libertine and Biolinum fonts in both Type 1 and OTF styles, together with support macros for their use. Monospaced and display fonts, and the "keyboard" set are also included, in OTF style, only. The mweights package is used to manage the selection of font weights. The package supersedes both the libertineotf and the libertine-legacy packages.
OTF conversion of Yannis Haralambous' Old German decorative initials
This package is a conversion of the yinit font into OTF. Original Metafont files for yinit are in the yinit package.
Upright calligraphic font based on TX calligraphic
This small package provides a means of loading as \mathcal an uprighted version of the calligraphic fonts from the TX font package. A scaled option to provided to allow arbitrary scaling.
The bundle provides the BerenisADF Pro font collection, in OpenType and PostScript Type 1 formats, together with support files to use the fonts in TeXnANSI (LY1) and LaTeX standard T1 and TS1 encodings.
Gentium fonts (in two formats) and support files
Gentium is a typeface family designed to enable the diverse ethnic groups around the world who use the Latin, Cyrillic and Greek scripts to produce readable, high-quality publications. It supports a wide range of Latin- and Cyrillic-based alphabets. The package consists of: The original (unaltered) GentiumPlus, GentiumBook, and other Gentium-family fonts in TrueType format, as developed by SIL and released under the OFL (see OFL.txt and OFL-FAQ.txt); Converted fonts in PostScript Type 1 format, released under the same terms. These incorporate the name "Gentium" by permission of SIL given to the TeX Users Group; ConTeXt, LaTeX and other supporting files; TeX-related documentation, and the SIL documentation and other files.
Font containing a set of web-related icons
This package grants access to 336 web-related icons provided by the included "Typicons" free font, designed by Stephen Hutchings and released under the SIL Open Font License. See http://www.typicons.com for more details about the font itself. This package requires the fontspec package and either the Xe(La)TeX or Lua(La)TeX engine to load the included ttf font. Once the package is loaded, icons can be accessed through the general \ticon command, which takes as argument the name of the desired icon, or through direct commands specific to each icon. The full list of icon designs, names and direct commands is showcased in the manual.
The fonts are derived from the computer modern mathematics fonts and from Knuth's Concrete Roman fonts; they are distributed as Metafont source. LaTeX support is offered by the concmath package.
The linearA package provides a simple interface to two fonts which include all known symbols, simple and complex, of the Linear A script. This way one can easily replicate Linear A "texts" using modern typographic technology. Note that the Linear A script has not been deciphered yet and probably never will be deciphered.
GFS Complutum derives, via a long development, from a minuscule- only font cut in the 16th century. An unsatisfactory set of majuscules were added in the early 20th century, but its author died before he could complete the revival of the font. The Greek Font Society has released this version, which has a new set of majuscules.
The Libre Caslon fonts are designed by Pablo Impallari. Although they have been designed for use as web fonts, they work well as conventional text fonts. A bold italic variant is not currently available. As a stopgap, an artificially slanted bold variant has been created and treated as italic.
This work provides the necessary files to use the Chivo fonts with LaTeX. Chivo is a set of eight fonts provided by Hector Gatti & Omnibus Team under the Open Font License [(OFL)](http://scripts.sil.org/OFL), version 1.1. The fonts are copyright (c) 2011-2015, Omnibus-Type.
The bundle provides an Adobe Type 1 font, and LaTeX support for its use. The magazine web site shows the font in use in a few places.
The package contains the Bera Type 1 fonts, and a zip archive containing files to use the fonts with LaTeX. Bera is a set of three font families: Bera Serif (a slab-serif Roman), Bera Sans (a Frutiger descendant), and Bera Mono (monospaced/typewriter). Support for use in LaTeX is also provided. The Bera family is a repackaging, for use with TeX, of the Bitstream Vera family.
The package provides "mid-level" access to tengwar fonts, providing good quality output. Each tengwar sign is represented by a command, which will place the sign nicely in relation to previous signs. A transcription package is available from the package's home page: writing all those tengwar commands would quickly become untenable. The package supports the use of a wide variety of tengwar fonts that are available from the net; metric and map files are provided for all the supported fonts.
The package offers LaTeX support for the expanded Times Roman font, which has been used for many years in the Journal d'Analyse Mathematique. Mathematics support is based on the Belleek fonts.
The BrushScript font simulates hand-written characters; it is distributed in Adobe Type 1 format (but is available in italic shape only). The package includes the files needed by LaTeX in order to use that font. The file AAA_readme.tex fully describes the package and sample.tex illustrates its use.
The bundle provides bold versions of cmcsc, cmex, cmtex and cmtt fonts (all parts of the standard computer modern font distribution), as Metafont base files.
OrnementsADF font with TeX/LaTeX support
The bundle provides the Ornements ADF font in PostScript type 1 format with TeX/LaTeX support files. The font is licensed under GPL v2 or later with font exception. (See NOTICE, COPYING, README.) The TeX/LaTeX support is licensed under LPPL. (See README, manifest.txt.)
GoSans and GoMono fonts with LaTeX support
This package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the GoSans and GoMono families of fonts designed by the Bigelow & Holmes foundry for the Go project. GoSans is available in three weights: Regular, Medium, and Bold (with corresponding italics). GoMono is available in regular and bold, with italics. Notes on the design may be found at https://blog.golang.org/go-fonts.
Using the free ASAP Symbol font with LaTeX and Plain TeX
The package provides macros (usable with LaTeX or Plain TeX) for using the freely available ASAP Symbol font, which is also included. The font is distributed in OpenType format, and makes extensive use of OpenType features. Therefore, at this time, only XeTeX and LuaTeX are supported. An error message is issued if an OTF-capable engine is not detected.
The Open Sans font family, and LaTeX support
Open Sans is a humanist sans serif typeface designed by Steve Matteson; the font is available from the Google Font Directory as TrueType files licensed under the Apache License version 2.0. The package provides support for this font family in LaTeX. It includes the original TrueType fonts, as well as Type 1 versions, converted for this package using FontForge for full support with dvips
Lobster Two fonts, with support for all LaTeX engines
Lobster Two is a family of script fonts designed bt Pablo Impallari. It has many ligatures and terminal forms, but most of these can be accessed only using XeLaTeX or LuaLaTeX. Font access and use is supported in LaTeX.
This directory contains the DictSym Type1 font designed by Georg Verweyen and all files required to use it with LaTeX on the Unix or PC platforms. The font provides a number of symbols commonly used in dictionaries. The accompanying macro package makes the symbols accessible as LaTeX commands.
Support for multiple-weight font packages
Many font families available for use with LaTeX are available at multiple weights. Many Type 1-oriented support packages for such fonts re-define the standard \mddefault or \bfdefault macros. This can create difficulties if the weight desired for one font family isn't available for another font family, or if it differs from the weight desired for another font family. The package provides a solution to these difficulties.
The package provides macros to support use of the eiad fonts in OT1 encoding. Also offered are a couple of Metafont files described in the font package, but not provided there.
Mathematical symbol font for Adobe MinionPro
MnSymbol is a symbol font family, designed to be used in conjunction with Adobe Minion Pro (via the MinionPro package). Almost all of LaTeX and AMS mathematical symbols are provided; remaining coverage is available from the MinionPro font with the MinionPro package. The fonts are available both as Metafont source and as Adobe Type 1 format, and a comprehensive support package is provided. While the fonts were designed to fit with Minon Pro, the design should fit well with other renaissance or baroque faces: indeed, it will probably work with most fonts that are neither too wide nor too thin, for example Palatino or Times; it is known to look good with Sabon. There is no package designed to configure its use with any font other than Minion Pro, but (for example) simply loading mnsymbol after mathpazo will probably do what is needed.
Free replacement for basic MathTime fonts
This package replaces the original MathTime fonts, not MathTime- Plus or MathTime Professional (the last being the only currently available commercial bundle).
Metafont sources modified from Computer Modern in order to generate "long s" which was used in old text.
A Metafont-implementation of the logo commonly known as 'Der Grune Punkt' ('The Green Point'). In Austria, it can be found on nearly every bottle. It should not be confused with the 'Recycle'-logo, implemented by Ian Green.
The Annals of Mathematics uses italics for theorems. However, slanted digits and parentheses look disturbing when surrounded by (upright) mathematics. This package provides virtual fonts with italics and upright digits and punctuation, as an extension to Mathdesign's Utopia bundle.
A calligraphic font in the handwriting style of the author, Peter Vanroose. The font is supplied as Metafont source. LaTeX support of the font is provided in the calligra package in the fundus bundle.
The Cyclop typeface was designed in the 1920s at the workshop of Warsaw type foundry "Odlewnia Czcionek J. Idzkowski i S-ka". This sans serif typeface has a highly modulated stroke so it has high typographic contrast. The vertical stems are much heavier then horizontal ones. Most characters have thin rectangles as additional counters giving the unique shape of the characters. The lead types of Cyclop typeface were produced in slanted variant at sizes 8-48 pt. It was heavily used for heads in newspapers and accidents prints. Typesetters used Cyclop in the inter-war period, during the occupation in the underground press. The typeface was used until the beginnings of the offset print and computer typesetting era. Nowadays it is hard to find the metal types of this typeface. The font was generated using the Metatype1 package. Then the original set of characters was completed by adding the full set of accented letters and characters of the modern Latin alphabets (including Vietnamese). The upright variant was generated and it was more complicated task than it appeared at the beginning. 11 upright letters of the Cyclop typeface were presented in the book by Filip Trzaska, "Podstawy techniki wydawniczej" ("Foundation of the publishing techonology"), Warsaw 1967. But even the author of the book does not know what was the source of the presented examples. The fonts are distributed in the Type1 and OpenType formats along with the files necessary for use these fonts in TeX and LaTeX including encoding definition files: T1 (ec), T5 (Vietnamese), OT4, QX, texnansi and nonstandard ones (IL2 for Czech fonts).
The package provides font definition files (plus a replacement for the package exscale) to access many of the fonts in Sauter's collection. These fonts are available in all point sizes and look nicer for such "intermediate" document sizes as 11pt. Also included is the package sbbm, an alternative to access the bbm fonts.
A monospaced font, with support files for use with TeX
Inconsolata is a monospaced font designed by Raph Levien. This package contains the font (in both Adobe Type 1 and OpenType formats) in regular and bold weights, with additional glyphs and options to control slashed zero, upright quotes and a shapelier lower-case L, plus metric files for use with TeX, and LaTeX font definition and other relevant files.
LaTeX support for Quattrocento and Quattrocento Sans fonts
The package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the Quattrocento and Quattrocento Sans families of fonts, designed by Pablo Impallari; the fonts themselves are also provided, in both Type 1 and OpenType format. Quattrocento is a classic typeface with wide and open letterforms, and great x-height, which makes it very legible for body text at small sizes. Tiny details that only show up at bigger sizes make it also great for display use. Quattrocento Sans is the perfect sans-serif companion for Quattrocento.
The Libre Bodoni fonts are designed by Pablo Impallari and Rodrigo Fuenzalida, based on the 19th century Morris Fuller Benton's.
Solomos is a font which traces its descent from a calligraphically-inspired font of the mid-19th century. LaTeX support, for use with the LGR encoding only, is provided.
Kurier is a two-element sans-serif typeface. It was designed for a diploma in typeface design at the Warsaw Academy of Fine Arts under the supervision of Roman Tomaszewski. This distribution contains a significantly extended set of characters covering the following modern alphabets: latin (including Vietnamese), Cyrillic and Greek as well as a number of additional symbols (including mathematical symbols). The fonts are prepared in Type 1 and OpenType formats. For use with TeX the following encoding files have been prepared: T1 (ec), T2 (abc), and OT2--Cyrillic, T5 (Vietnamese), OT4, QX, texansi and--nonstandard (IL2 for the Czech fonts), as well as supporting macros and files defining fonts for LaTeX.
A font for the pigpen (or masonic) cipher
The Pigpen cipher package provides the font and the necessary wrappers (style file, etc.) in order to write Pigpen ciphers, a simple substitution cipher. The package provides a font (available both as Metafont source, and as an Adobe Type 1 file), and macros for its use.
Use New Century Schoolbook text with Fourier maths fonts
This package provides a LaTeX mathematics font setup for use with New Century Schoolbook text. In order to use it you need to have the Fourier-GUTenberg fonts installed.
This is a conversion (using mf2pt1) of Peter Vanroose's handwriting font.
The package contains OCR-B fonts in Type1 and OpenType formats. They were generated from the Metafont sources of the OCR-B fonts. The metric files are not included here, so that original ocr-b package should also be installed.
Serif and sans serif complete text font families, in both Adobe Type 1 and OpenType formats for publication. The family is based on Utopia family, and has been modified and developed by the Arkandis Digital foundry. Support for using the fonts, in LaTeX, is also provided (and makes use of the nfssext-cfr package).
An OpenType Devanagari font designed for scholars
This package provides a free, open source, Unicode compliant, OpenType font with support for Devanagari, Latin, and Cyrillic scripts. It is available in two weights--regular and bold. The font is designed with over 1600 Devanagari glyphs, including support for over 1100 conjunct consonants, as well as vedic accents. The Latin component of the font not only supports a wide range of characters required for Roman transliteration of Sanskrit, but also provides a subset of regularly used mathematical symbols for scholars working with scientific and technical documents. The project has been launched under the auspices of the Science and Heritage Initiative (SandHI) at IIT Bombay, and builds upon the following two fonts for its Devanagari and Latin components respectively: (i) Yashomudra by Rajya Marathi Vikas Samstha, and (ii) PT Serif by ParaType. We would like to thank both these organisations for releasing their fonts under the SIL Open Font Licence, which has enabled us to create Shobhika.
A mathematical calligraphic font based on rsfs
The package provides virtual fonts and LaTeX support files for mathematical calligraphic fonts based on the rsfs Adobe Type 1 fonts (which must also be present for successful installation, with the slant substantially reduced. The output is quite similar to that from the Adobe Mathematical Pi script font.
Epigrafica is forked from the development of the MgOpen font Cosmetica, which is a similar design to Optima and includes Greek. Development has been supported by the Laboratory of Digital Typography and Mathematical Software, of the Department of Mathematics of the University of the Aegean, Greece.
Clear Sans was designed by Daniel Ratighan at Monotype under the direction of the User Experience team at Intel's Open Source Technology Center. Clear Sans is available in three weights (regular, medium, and bold) with corresponding italics, plus light and thin upright (without italics). Clear Sans has minimized, unambiguous characters and slightly narrow proportions, making it ideal for UI design. Its strong, recognizable forms avoid distracting ambiguity, making Clear Sans comfortable for reading short UI labels and long passages in both screen and print. The fonts are available in both TrueType and Type 1 formats.
A font that contains all the symbols of the famous Disc of Phaistos, together with a LaTeX package. The disc was 'printed' by stamping the wet clay with some sort of punches, probably around 1700 BCE. The font is available in Adobe Type 1 and OpenType formats (the latter using the Unicode positions for the symbols). There are those who believe that this Cretan script was used to 'write' Greek (it is known, for example, that the rather later Cretan Linear B script was used to write Greek), but arguments for other languages have been presented.
Romande ADF is a serif font family with oldstyle figures, designed as a substitute for Times, Tiffany or Caslon. The family currently includes upright, italic and small-caps shapes in each of regular and demi-bold weights and an italic script in regular. The support package renames the fonts according to the Karl Berry fontname scheme and defines four families. Two of these primarily provide access to the "standard" or default characters while the "alternate" families support alternate characters, additional ligatures and the long s. The included package files provide access to these features in LaTeX as explained in the documentation. The LaTeX support requires the nfssext-cfr and the xkeyval packages.
Always keep upright shape for some punctuation marks and Arabic numerals
The package provides a mechanism to keep punctuation always in upright shape even if italic was specified. It is directed to Latin Modern fonts, and provides .tfm, .vf, .fd, and .sty files. Here a list of punctuation characters always presented in upright shapes: comma, period, semicolon, colon, parentheses, square brackets, and Arabic numerals.
This package allows the user to produce Braille documents on paper for the blind without knowing Braille (which can take years to learn). Python scripts grade1.py and grade2.py convert ordinary text to grade 1 and 2 Braille tags; then, the LaTeX package takes the tags and prints out corresponding Braille symbols.
Type 1 CM-based fonts for Latin, Greek and Cyrillic
The fonts are converted from Metafont sources of the Computer Modern font families, using textrace. Supported encodings are: T1 (Latin), T2A (Cyrillic), LGR (Greek) and TS1. The package also includes Unicode virtual fonts for use with Omega. The font set is not a replacement for any of the other Computer Modern-based font sets (for example, cm-super for Latin and Cyrillic, or cbgreek for Greek), since it is available at a single size only; it offers a compact set for 'general' working. The fonts themselves are encoded to external standards, and virtual fonts are provided for use with TeX.
The package provides glyph and font access commands so that LaTeX users can use the ASCII glyphs in their documents. The ASCII font is encoded according to the IBM PC Code Page 437 C0 Graphics. This package replaces any early LaTeX 2.09 package and "font" by R. Ramasubramanian and R.W.D. Nickalls.
Arimo sans serif fonts with LaTeX support
The Arimo family, designed by Steve Matteson, is an innovative, refreshing sans serif design which is metrically compatible with Arial.
The package provides a 7-bit IPA font, as Metafont source, and macros for support under TeXt1 and LaTeX. The fonts (and macros) are now largely superseded by the tipa fonts.
A Type 1 font and LaTeX support for Libertinus Math
The package provides a Type1 version of Libertinus Math, with a number of additions and changes, plus LaTeX support files that allow it to serve as a math accompaniment to Libertine under LaTeX.
LaTeX support for the Cantarell font family
Cantarell is a contemporary Humanist sans serif designed by Dave Crossland and Jakub Steiner. This font, delivered under the OFL version 1.1, is available on the GNOME download server. The present package provides support for this font in LaTeX. It includes Type 1 versions of the fonts, converted for this package using FontForge from its sources, for full support with Dvips.
This package sets the default typewriter font to Courier with a possible scale factor (in the same way as the helvet package for Helvetica works for sans serif).
Support for the ttf and otf DejaVu fonts
Package dejavu-otf supports the free ttf-fonts from the DejaVu project which are available from GitHub or already part of your system (Windows/Linux/...) and the OpenType version of the TeXGyre Math, which is part of any TeX distribution.
The Miama Nueva handwriting font with LaTeX support
Miama Nueva is a handwriting / script font with over 1300 glyphs that supports latin, cyrillic, and greek. It comes complete with LaTeX support.
LaTeX encoding tools for Bookhands fonts
The package characterises and defines the author's B1 encoding for use with LaTeX when typesetting things using his Bookhands fonts.
These fonts are designed for titling use, and consist of capital roman letters only. Together with the normal set of base shapes, the family also offers an informal shape. The distribution is as Metafont source. LaTeX support is available in the duerer-latex bundle.
Use URW's clone of Zapf Chancery as a maths alphabet
The package allows (the URW clone of) Zapf Chancery to function as a maths alphabet, the target of \mathcal or \mathscr, with accents appearing where they should, and other spacing parameters set to reasonable (not very tight) values. The font itself may be found in the URW basic fonts collection. This package supersedes the pzccal package.
The package provides a font of mathematical symbols, MyriadPro The font is designed as a companion to Adobe Myriad Pro, but it might also fit well with other contemporary typefaces.
The package provides 11 symbols for typesetting recipes: oven, gasstove, topheat, fanoven, gloves and dish symbol (among others). The symbols are defined using Metafont.
Write vectors using an arrow which differs from the Computer Modern one. You have the choice between several kinds of arrows. The package consists of the relevant Metafont code and a package to use it.
The bundle contains the traditional slides fonts revised to be completely usable both as text fonts and mathematics fonts; they are fully integrate with the new operators, letters, symbols and extensible delimiter fonts, as well as with the AMS fonts, all redone with the same stylistic parameters.
LaTeX Support for the Inuktitut Language
The package provides a set of Lambda (Omega LaTeX) typesetting tools for the Inuktitut language. Five different input methods are supported and with the necessary fonts are also provided.
The Cherokee script was designed in 1821 by Segwoya. The alphabet is essentially syllabic, only 6 characters (a e i o s u) correspond to Roman letters: the font encodes these to the corresponding roman letter. The remaining 79 characters have been arbitrarily encoded in the range 38-122; the cherokee package provides commands that map each such syllable to the appropriate character; for example, Segwoya himself would be represented \Cse\Cgwo\Cya. The font is distributed as Metafont source; it works very poorly in modern environments, and could do with expert attention (if you are interested, please contact the CTAN team for details).
The package provides a maths support that amounts to modifications of the STIX sans serif Roman and Greek letters with most symbols taken from newtxmath (which must of course be installed and its map file enabled).
A Metafont font that can produce die faces in 2D or with various 3D effects.
Metafont Phonetic fonts, based on Computer Modern
The fonts are based on Computer Modern, and specified in Metafont. Macros for the fonts' use are provided, both for LaTeX 2.09 and for current LaTeX.
Extensions to txfonts, using GNU Freefont
A set of fonts that extend the txfonts bundle with small caps and old style numbers, together with Greek support. The extensions are made with modifications of the GNU Freefont.
This package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the Cormorant Garamond family of fonts, designed by Christian Thalman of Catharsis Fonts. The family includes light, regular, medium, semi-bold and bold weights, with italics.
This is a set of 23 tiny packages designed to make it easier to use fonts from the initials package in LaTeX, e.g. with the lettrine package. It is a response to comments on an answer at TeX Stack Exchange (http://tex.stackexchange.com/a/236410/) requesting sample package files for others to copy. I had previously assumed these were too trivial to be of interest, but if they would be useful, then I would prefer them to be generally available via CTAN.
The design of Didot's 1805 Greek typeface was influenced by the neoclassical ideals of the late 18th century. The font was brought to Greece at the time of the 1821 Greek Revolution, by Didot's son, and was very widely used. The present version is provided by the Greek Font Society. The font supports the Greek alphabet, and is accompanied by a matching Latin alphabet based on Zapf's Palatino. LaTeX support is provided, using the OT1, T1 and LGR encodings.
LaTeX support for the Droid font families
The Droid typeface family was designed in the fall of 2006 by Steve Matteson, as a commission from Google to create a set of system fonts for its Android platform. The goal was to provide optimal quality and comfort on a mobile handset when rendered in application menus, web browsers and for other screen text. The Droid family consists of Droid Serif, Droid Sans and Droid Sans Mono fonts, licensed under the Apache License Version 2.0. The bundle includes the fonts in both TrueType and Adobe Type 1 formats. The package does not support the Droid Pro family of fonts, available for purchase from the Ascender foundry.
Computer Modern for Serbian and Macedonian
This package provides provides Adobe Type 1 Computer Modern fonts for the Serbian and Macedonian languages. Although the cm-super package provides great support for cyrillic script in various languages, there remains a problem with italic variants of some letters for Serbian and Macedonian. This package includes the correct shapes for italic letters \cyrb, \cyrg, \cyrd, \cyrp, and \cyrt. It also offers some improvements in letters and accents used in the Serbian language. Supported encodings are: T1, T2A, TS1, X2 and OT2. The OT2 encoding is modified so that it is now easy to transcribe Latin text to Cyrillic.
Astrosym is a font containing astronomical symbols, including those used for the planets, four planetoids, the phases of the moon, the signs of the zodiac, and some additional symbols. The font is distributed as Metafont source.
A Scientific Times-like font with support for mathematical typesetting
XITS is a Times-like font for scientific typesetting with proper mathematical support for modern, Unicode and OpenType capable TeX engines, namely LuaTeX and XeTeX. For use with LuaLaTeX or XeLaTeX, support is available from the fontspec and unicode-math packages.
A Greek math font in the Neo-Hellenic style
The GFSNeohellenic font, a historic font first designed by Victor Scholderer, and digitized by George Matthiopoulos of the Greek Font Society (GFS), now has native support for Mathematics. The project was commissioned to GFS by the Department of Mathematics of the University of the Aegean, Samos, Greece. The Math Table was constructed by the Mathematics Professor A. Tsolomitis. A useful application is in beamer documents since this is a Sans Math font. The GFSNeohellenic fontfamily supports many languages (including Greek), and it is distributed (both text and math) under the OFL license.
Tinos, designed by Steve Matteson, is an innovative, refreshing serif design that is metrically compatible with Times New Roman.
The package provides a Bembo-like font package based on Cardo but with many modifications, adding Bold Italic, small caps in all styles, six figure choices in all styles, updated kerning tables, added figure tables and corrected f-ligatures. Both OpenType and Adobe Type 1 versions are provided; all necessary support files are provided. The font works well with newtxmath's libertine option.
A simple compilation of the genealogical symbols found in the wasy and gen fonts, adding the male and female symbols to Knuth's 'gen' font, and so avoiding loading two fonts when you need only genealogical symbols. The font is distributed as Metafont source.
Tapir is a simple geometrical font mostly created of line and circular segments with constant thickness. The font is available as Metafont source and in Adobe Type 1 format. The character set contains all characters in the range 0-127 (as in cmr10), accented characters used in the Czech, Slovak and Polish languages.
The fonts (ark10 and dingbat) are specified in Metafont; support macros are provided for use in LaTeX. An Adobe Type 1 version of the fonts is available in the niceframe fonts bundle.
A double-struck serifed font for mathematical use
DSSerif is a mathematical font package with double struck serifed digits, upper and lower case letters, in regular and bold weights. The design was inspired by the STIX double struck fonts, which are sans serif, but starting from a Courier-like base.
The package revives Frutinger's Algol alphabet, designed in 1963 for the code segments in an ALGOL manual. OpenType and type1, regular and medium weights, upright and slanted. Not monospaced, but good for listings if you don't need code to be aligned with specific columns. It also makes a passable but limited text font.
Electrum ADF is a slab-serif font featuring optical and italic small-caps; additional ligatures and an alternate Q; lining, hanging, inferior and superior digits; and four weights. The fonts are provided in Adobe Type 1 format and the support material enables use with LaTeX. Licence is mixed: LPPL for LaTeX support; GPL with font exception for the fonts.
Type 1 versions of the fonts recommended in niceframe
The bundle provides Adobe Type 1 versions of the fonts bbding10, dingbat, karta15, umranda and umrandb.
Typeset mathematical double stroke symbols
A font based on Computer Modern Roman useful for typesetting the mathematical symbols for the natural numbers (N), whole numbers (Z), rational numbers (Q), real numbers (R) and complex numbers (C); coverage includes all Roman capital letters, '1', 'h' and 'k'. The font is available both as Metafont source and in Adobe Type 1 format, and LaTeX macros for its use are provided. The fonts appear in the blackboard bold sampler.
Boisik is a serif font set (inspired by the Baskerville typeface), written in Metafont. The set comprises roman and italic text fonts and maths fonts. LaTeX support is offered for use with OT1, IL2 and OM* encodings.
The epsdice package defines a single command \epsdice that takes a numeric argument (in the range 1-6), and selects a face image from a file that contains each of the 6 possible die faces. The graphic file is provided in both Encapsulated PostScript and PDF formats.
Font for Conan Doyle'ss "The Dancing Men"
The (Sherlock Holmes) book contains a code which uses dancing men as glyphs. The alphabet as given is not complete, lacking f, j, k, q, u, w, x and z, so those letters in the font are not due to Conan Doyle. The code required word endings to be marked by the dancing man representing the last letter to be holding a flag: these are coded as A-Z. thaTiStOsaYsentenceSiNthEcodElooKlikEthiS. In some cases, the man has no arms, making it impossible for him to hold a flag. In these cases, he is wearing a flag on his hat in the 'character'. The font is distributed as Metafont source; it works poorly in modern environments, and could do with expert attention (if you are interested, please contact the CTAN team for details).
LaTeX support for Creative Commons icons
The package provides the means to typeset Creative Commons icons, in documents licensed under CC licences. A font (in Adobe Type 1 format) and LaTeX support macros are provided.
Cochineal is a fork from the Crimson fonts (Roman, Italic, Bold, BoldItalic only) released under the OFL by Sebastian Kosch. These remarkable fonts are inspired by the famous oldstyle fonts in the garalde family (Garamond, Bembo) but, in the end, look more similar to Minion, though with smaller xheight and less plain in detail. The Crimson fonts on which these were based had roughly 4200 glyphs in the four styles mentioned above. Cochineal adds more than 1500 glyphs in those styles so that it is possible to make a TeX support collection that contains essentially all glyphs in all styles. Bringing the Semibold styles up the same level would have required adding about 2000 additional glyphs, which I could not even contemplate. The fonts are provided in OpenType and PostScript formats.
The package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the Carlito family of sans serif fonts, designed by Lukasz Dziedzic of the tyPoland foundry and adopted by Google for ChromeOS as a font-metric compatible replacement for Calibri.
Provides right- and left-pointing hands in both black-on-white and white-on-black realisation. The font is distributed as Metafont source.
IM Fell English fonts with LaTeX support
Igino Marini has implemented digital revivals of fonts bequeathed to Oxford University by Dr. John Fell, Bishop of Oxford and Dean of Christ Church in 1686. This package provides the English family, consisting of Roman, Italic and Small-Cap fonts.
This package offers LuaLaTeX/XeLaTeX support for the Libertinus OpenType fonts maintained by Khaled Hosny. Furthermore math-bold, mono-bold, mono-oblique, and mono-bold-oblique font styles are provided, which have been derived from the ones in the libertinus package itself. The Libertinus fonts are similiar to Libertine and Biolinum, but come with math symbols.
Virtual maths alphabets based on pxfonts and txfonts
The package provides virtual math alphabets based on pxfonts and txfonts, with LaTeX support files and adjusted metrics. The mathalfa package offers support for this collection.
The font provides the Ogham alphabet, which is found on a number of Irish and Pictish carvings dating from the 4th century AD. The font is distributed as Metafont source, which has been patched (with the author's permission) for stability at different output device resolutions. (Thanks are due to Peter Flynn and Dan Luecking.)
This is a fork of the Linux Libertine and Linux Biolinum fonts that started as an OpenType math companion of the Libertine font family, but grown as a full fork to address some of the bugs in the fonts. The family consists of: Libertinus Serif: forked from Linux Libertine. Libertinus Sans: forked from Linux Biolinum. Libertinus Mono: forked from Linux Libertine Mono. Libertinus Math: an OpenType math font for use in OpenType math- capable applications like LuaTeX, XeTeX or MS Word 2007+.
Alternative uses of the TX fonts, with improved metrics
The bundle splits txfonts.sty (from the TX fonts distribution) into two independent packages, newtxtext.sty and newtxmath.sty, each with fixes and enhancements. newtxmath's metrics have been re-evaluated to provide a less tight appearance, and to provide a libertine option that substitutes Libertine italic and Greek letter for the existing math italic and Greek glyphs, making a mathematics package that matches Libertine text quite well. newtxmath can also use the maths italic font provided with the garamondx package, thus offering a garamond-alike text-with- maths combination.
Frederika2016 is an attempt to digitize Hermann Zapf's Frederika font. The font is the Greek companion of Virtuosa by the same designer. This font is a calligraphy font and this is an initial release.
Fonts designed by Fra Luca de Pacioli in 1497
Pacioli was a c.15 mathematician, and his font was designed according to 'the divine proportion'. The font is uppercase letters together with punctuation and some analphabetics; no lowercase or digits. The Metafont source is distributed in a .dtx file, together with LaTeX support.
The fonts are a monowidth set, designed for use by coders. They appear as a set of four TrueType, or Adobe Type 1 font files, and LaTeX support is also provided.
The Metafont sources and TFM files of the European Concrete Fonts. This is the T1-encoded extension of Knuth's Concrete fonts, including also the corresponding text companion fonts. Adobe Type 1 versions of the fonts are available as part of the cm-super font bundle.
The hfoldsty package provides virtual fonts for using oldstyle (0123456789) figures with the European Computer Modern fonts. It does a similar job as the eco package by Sebastian Kirsch but includes a couple of improvements, i.e., better kerning with guillemets, and support for character protruding using the pdfcprot package.
Mathematical fonts to fit with particular text fonts
The Math Design project offers free mathematical fonts that match with existing text fonts. To date, three free font families are available: Adobe Utopia, URW Garamond and Bitstream Charter. Three commercial fonts are also supported: Adobe Garamond Pro, Adobe UtopiaStd and ITC Charter. Mathdesign covers the whole LaTeX glyph set, including AMS symbols and some extra. Both roman and bold versions of these symbols can be used. Moreover you can choose between three greek fonts (two of them created by the Greek Font Society).
The package allows selection of Latin Modern Typewriter fonts with scaling and access to all its features. The package requires the mweights package.
A LaTeX interface to the old-german fonts designed by Yannis Haralambous: Gothic, Schwabacher, Fraktur and the baroque initials.
The font covers an old Turkic script. It is provided as Metafont source.
Enhanced support for the Latin Modern fonts
The package supports a number of features of the Latin Modern fonts which are not easily accessible via the default (La)TeX support provided in the official distribution. In particular, the package supports the use of the various styles of digits available, small-caps and upright italic shapes, and alternative weights and widths. It also supports variable width typewriter and the "quotation" font. Version 2.004 of the Latin Modern fonts is supported. By default, the package uses proportional oldstyle digits and variable width typewriter but this can be changed by passing appropriate options to the package. The package also supports using (for example) different styles of digits within a document so it is possible to use proportional oldstyle digits by default, say, but tabular lining digits within a particular table. The package requires the official Latin Modern distribution, including its (La)TeX support. The package relies on the availability of both the fonts themselves and the official font support files. The package also makes use of the nfssext-cfr package. Only the T1 and TS1 encodings are supported for text fonts. The set up of fonts for mathematics is identical to that provided by Latin Modern.
IPAex fonts converted to Type-1 format Unicode subfonts
The package contains the IPAex Fonts converted into Unicode subfonts in Type1 format, which is most suitable for use with the CJK package. Font conversion was done with ttf2pt1.
The package contains the Antykwa Poltawskiego family of fonts in the PostScript Type 1 and OpenType formats. The original font was designed in the twenties of the XX century by the Polish typographer Adam Poltawski(1881-1952). Following the route set out by the Latin Modern and TeX Gyre projects (http://www.gust.org.pl/projects/e-foundry), the Antykwa Poltawskiego digitisation project aims at providing a rich collection of diacritical characters in the attempt to cover as many Latin-based scripts as possible. To our knowledge, the repertoire of characters covers all European languages as well as some other Latin-based alphabets such as Vietnamese and Navajo; at the request of users, recent extensions (following the enhancement of the Latin Modern collection) provide glyphs sufficient for typesetting of romanized transliterations of Arabic and Sanskrit scripts. The Antykwa Poltawskiego family consists of 4 weights (light, normal, medium, bold), each having upright and italic forms and one of 5 design sizes: 6, 8, 10, 12 and 17pt. Altogether, the collection comprises 40 font files, containing the same repertoire of 1126 characters. The preliminary version of Antykwa Poltawskiego (antp package) released in 2000 is rendered obsolete by this package.
A font to typeset maths in Xe(La)TeX and Lua(La)TeX
The Asana-Math font is an OpenType font that includes almost all mathematical Unicode symbols and it can be used to typeset mathematical text with any software that can understand the MATH OpenType table (e.g., XeTeX 0.997 and Microsoft Word 2007). The font is beta software. Typesetting support for use with LaTeX is provided by the fontspec and unicode-math packages.
LaTeX support for "blackboard-style" cm fonts
Provides LaTeX support for Blackboard variants of Computer Modern fonts. Declares a font family bbm so you can in principle write running text in blackboard bold, and lots of math alphabets for using the fonts within maths.
In both lower and upper case 32 letters are defined (18 'plain' ones, 5 long vowels and 9 aspirated consonants). The ligature 'agus' is also made available. The remaining characters (digits, punctuation and accents) are inherited from the Computer Modern family of fonts. The font definitions use code from the sauter fonts, so those fonts have to be installed before using eiad. OT1*.fd files are provided for use with LaTeX.
The package provides the Overlock and OverlockSC families of fonts, designed by Dario Manuel Muhafara of the TIPO foundry (http://www.tipo.net.ar) are "rounded" sans-serif fonts in three weights (Regular, Bold, Black) with italic variants for each of them. There are also small-caps and old-style figures in the Regular weight.
Typeset Icelandic staves and runic letters
This package contains all the necessary tools to typeset the "magical" Icelandic staves plus the runic letters used in Iceland. Included are a font in Adobe Type 1 format and LaTeX support.
Montserrat sans serif, otf and pfb, with LaTeX support files
Montserrat is a geometric sans-serif typeface designed by Julieta Ulanovsky, inspired by posters and signage from her historical Buenos Aires neighborhood of the same name. It is rather close in spirit to Gotham and Proxima Nova, but has its own individual appearance -- more informal, less extended, and more idiosyncratic. It is provided in a total of nine different weights, each having eight figure styles and small caps in both upright and italic shapes. There are two quite different versions that don't fit into the usual LaTeX classifications. The version having the appellation "Alternates" has letter shapes that are much more rounded than the default version, reflecting the signage in the neighborhood of Montserrat.
T1-encoded versions of Haralambous old German fonts
This package contains virtual fonts that offer T1-alike encoded variants of Yannis Haralambous's old German fonts Gothic, Schwabacher and Fraktur (which are also available in Adobe type 1 format). The package includes LaTeX macros to embed the fonts into the LaTeX font selection scheme.
LaTeX support for free fonts by ParaType
The package offers LaTeX support for the fonts PT Sans, PT Serif and PT Mono developed by ParaType for the project "Public Types of Russian Federation", and released under an open user license. The fonts themselves are provided in both the TrueType and Type 1 formats, both created by ParaType). The fonts provide encodings OT1, T1, IL2, TS1, T2* and X2. The package provides a convenient replacement of the two packages ptsans and ptserif.
EB Garamond is a revival by Georg Duffner of the 16th century fonts designed by Claude Garamond. The LaTeX support package works for (pdf)LaTeX, xeLaTeX and luaLaTeX users; configuration files for use with microtype are provided.
URW Antiqua condensed font, for use with TeX
The package contains a copy of the Type 1 font "URW Antiqua 2051 Regular Condensed" released under the GPL by URW, with supporting files for use with (La)TeX.
Comic Neue is a well-known redesign of the (in)famous Comic Sans font. The package provides the original OpenType font for XeTeX and LuaTeX users, and also has converted Type1 files for pdfTeX users. Issues with this package can be reported on GitHub or emailed to tex@slxh.nl.
The package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the IBM Plex families of fonts. Serif, Sans and Mono families are available in eight weights: Regular, Light, ExtraLight, Thin, Bold, Text, Medium and SemiBold (with corresponding italics).
Fonts for typesetting Tolkien Elvish scripts
The bundle provides fonts for Cirth (cirth.mf, etc.) and for Tengwar (teng10.mf). The Tengwar fonts are supported by macros in teng.tex, or by the (better documented) tengtex package.
Baskervald ADF fonts collection with TeX/LaTeX support
Baskervald ADF is a serif family with lining figures designed as a substitute for Baskerville. The family currently includes upright and italic or oblique shapes in each of regular, bold and heavy weights. All fonts include the slashed zero and additional non-standard ligatures. The support package renames them according to the Karl Berry fontname scheme and defines two families. One of these primarily provides access to the "standard" or default characters while the other supports additional ligatures. The included package files provide access to these features in LaTeX.
Use SourceSerifPro with TeX(-alike) systems
This package provides Source Serif Pro for LaTeX. It includes both Type1 and OpenType fonts and selects the latter when using XeLaTeX or LuaLaTeX. Issues with this package can be reported on GitHub (https://github.com/silkeh/latex- sourceserifpro/issues) or emailed to tex@slxh.nl.
This package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the Roboto, RobotoCondensed and RobotoSlab families of fonts, designed by Christian Robertson for Google.
The package contains StarFontSans and StarFontSerif, two public- domain astrological fonts designed by Anthony I.P. Owen, and the appropriate macros to use them with TeX and LaTeX. The fonts are supplied both in the original TrueType Format and in Adobe Type 1 format.
Merriweather and MerriweatherSans fonts, with LaTeX support
Merriweather features a very large x height, slightly condensed letterforms, a mild diagonal stress, sturdy serifs and open forms. The Sans family closely harmonizes with the weights and styles of the serif family. There are four weights and italics for each.
PostScript versions of the ESSTIX, with macro support
These fonts represent translation to PostScript Type 1 of the ESSTIX fonts. ESSTIX seem to have been a precursor to the STIX project, and were donated by Elsevier to that project. The accompanying virtual fonts with customized metrics and LaTeX support files allow their use as calligraphic, fraktur and double-struck (blackboard bold) in maths mode.
A response to the assertion in a lecture that "typography tends to lag behind other stylistic changes by about 10 years". Knuth felt it was (in 1988) time to design a replacement for his designs of the 1970s, and came up with this font! The fonts are distributed as Metafont source. The package offers LaTeX support by Rohit Grover, from an original by Sebastian Rahtz, which is slightly odd in claiming that the fonts are T1- encoded. A (possibly) more rational support package is to be found in punk-latex
Type1 versions of the STIX Two OpenType fonts
The stix2 package provides minimal support for using the STIX Two fonts with versions of TeX that are limited to TFM files, Type 1 PostScript fonts, and 8-bit font encodings. Version 2.0.0 of the STIX fonts are being released in this format in hopes of easing the transition from legacy TeX engines to modern fully Unicode-compatible systems. The Type 1 versions are merely a repackaging of the original OpenType versions and should not be viewed as independent entities. Some glyphs that are traditionally available in TeX math fonts are not yet available in the STIX Two OpenType fonts. In such cases, we have chosen to omit them from the stix2 package rather than create incompatibilities between the OpenType and Type 1 versions. In addition, while development of the OpenType versions is ongoing, no further updates are planned to the Type 1 versions of the fonts.
Metafont version of tiles in the style of Slavik Jablan
This is a small Metafont font to implement the modular tiles described by Slavik Jablan. For an outline of the theoretical structure of the tiles, see (for example) Jablan's JMM 2006 Exhibit.
The package and .fd file provide support for Knuth's punk fonts. That bundle also offers support within LaTeX; the present package is to be preferred.
LibrisADF is a sans-serif family designed to mimic Lydian. The bundle includes: fonts, in Adobe Type 1, TrueType and OpenType formats, and LaTeX support macros, for use with the Type 1 versions of the fonts. The LaTeX macros depend on the nfssext- cfr bundle. GPL licensing applies the fonts themselves; the support macros are distributed under LPPL licensing.
This package contains the free OpenType Textura font Missaali and a style file for using it with XeLaTeX. Textura is a typeface based on the textus quadratus form of the textualis formata that late medieval scribes used for the most valuable manuscripts. The font Missaali is based on Textura that German printer Bartholomew Ghotan used for printing missals and psalters in the 1480s. This font has two intended use cases: as a Gothic display font; and for emulating late-medieval manuscripts. In addition to the basic textura letters, the font contains a large number of abbreviation sigla as well as a set of Lombardic initials. As modern typesetting algorithms are not intended for creating 15th century style layout, the package contains a XeLaTeX style file that makes it easier to achieve the classic incunabula look.
LaTeX support for the Libre Baskerville family of fonts
Libre Baskerville is designed by Pablo Impallari. It is primarily intended to be a web font but is also attractive as a TeX font. As there is currently no bold italic variant, an artificially slanted version of the bold variant has been generated.
Old Standard: A Unicode Font for Classical and Medieval Studies
Old Standard is designed to reproduce the actual printing style of the early 20th century, reviving a specific type of Modern (classicist) style of serif typefaces, very commonly used in various editions of the late 19th and early 20th century, but almost completely abandoned later. The font supports typesetting of Old and Middle English, Old Icelandic, Cyrillic (with historical characters, extensions for Old Slavonic and localised forms), Gothic transliterations, critical editions of Classical Greek and Latin, and many more. Old Standard works with TeX engines that directly support OpenType features, such as XeTeX and LuaTeX.
A set of font metric files and virtual fonts for using the EC fonts with oldstyle numerals. These files can only be used together with the standard ec fonts. The style file eco.sty is sufficient to use the eco fonts but if you intend to use other font families as well, e.g., PostScript fonts, try altfont.
The Obyknovennaya Novaya (Ordinary New Face) typeface was widely used in the USSR for scientific and technical publications, as well as textbooks. The fonts are encoded to KOI8-R (which is a long-established Russian font encoding, rather than a TeX/LaTeX encoding). To use the fonts, the user needs Cyrillic font support.
Fry's Baskerville look-alike, with math support
BaskervilleF is a fork from the Libre Baskerville fonts (Roman, Italic, Bold only) released under the OFL by Paolo Impallari and Rodrigo Fuenzalida. Their fonts are optimized for web usage, while BaskervilleF is optimized for traditional TeX usage, normally destined for production of pdf files. A bold italic style was added and mathematical support is offered as an option to newtxmath.
This package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the Fira Sans family of fonts designed by Erik Spiekermann and Ralph du Carrois of Carrois Type Design. Fira Sans is available in eleven weights with corresponding italics: light, regular, medium, bold, ...
Extension and modification of BaskervaldADF with LaTeX support
Extends and modifies the BaskervaldADF font (a Baskerville substitute) with more accented glyphs, with small caps and oldstyle figures in all shapes. Includes OpenType and PostScript fonts, as well as LaTeX support files.
'A new font with symbols for use in Physics texts.'
The svrsymbols package is a LaTeX interface to theSVRsymbols font. The glyphs of this font are ideograms that have been designed for use in Physics texts. Some symbols are standard and some are entirely new.
A font that provides the product integral symbol
Product integrals are to products, as integrals are to sums. They have been around for more than a hundred years, they have not become part of the standard mathematician's toolbox, possibly because no-one invented the right mathematical symbol for them. The authors have remedied that situation by proposing the symbol and providing this font.
These files are regarded as basic for any TeX system, covering plain TeX macros, Computer Modern fonts, and configuration for common drivers; no LaTeX.
Computer Modern old-style arrows with smaller arrowheads
This package provides Computer Modern old-style arrows with smaller arrowheads, associated with the usual LaTeX commands. It can be used in documents that contain other amssymb arrow characters that also have small arrowheads. It is also possible to use the usual new-style Computer Modern arrows together with the old-style ones.
Use SourceSansPro with TeX(-alike) systems
The font is an open-source Sans-Serif development from Adobe. The package provides fonts (in both Adobe Type 1 and OpenType formats) and macros supporting their use in LaTeX (Type 1) and XeLaTeX/LuaLaTeX (OTF).
Accanthis No. 3 is designed by Hirwin Harendal and is suitable as an alternative to fonts such as Garamond, Galliard, Horley old style, Sabon, and Bembo. The support files are suitable for use with all LaTeX engines.
Fonts and LaTeX package for almost all runes
This large collection of fonts (in Adobe Type 1 format), with the LaTeX package gives access to almost all runes ever used in Europe. The bundle covers not only the main forms but also a lot of varieties.
This package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the Gillius and Gillius No. 2 families of sans serif fonts and condensed versions of them, designed by Hirwen Harendal. According to the designer, the fonts were inspired by Gill Sans.
Font for graphical symbols used in crystallography
The font is provided as an Adobe Type 1 font, and as Metafont source. Instructions for use are available both in the README file and (with a font diagram) in the documentation.
The package provides the files required to use the Rosario fonts with LaTeX. Rosario is a set of four fonts provided by Hector Gatti, Adobe Typekit & Omnibus-Type Team under the Open Font License (OFL), version 1.1. The fonts are copyright (c) 2012-2015, Omnibus-Type.
This package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the UniversalisADFStd family of fonts, designed by Hirwin Harendal. The font is suitable as an alternative to fonts such as Adrian Frutiger's Univers and Frutiger.
Provides EAN-8 and EAN-13 forms. The package needs the ocr-b fonts; note that the fonts are not available under a free licence, as the macros are.
LaTeX support for MintSpirit font families
The package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the MintSpirit and MintSpiritNo2 families of fonts, designed by Hirwen Harendal. MintSpirit was originally designed for use as a system font on a Linux Mint system. The No. 2 variant provides more conventional shapes for some glyphs.
Extended version of Knuth's logo typeface
The fetamont typeface was designed in METAFONT and extends the Logo fonts to complete the T1 encoding. The designs of the glyphs A, E, F, M, N, O, P, S and T are based on the METAFONT constructions by D. E. Knuth. The glyphs Y and 1 imitate the shapes of the corresponding glyphs in the METATYPE1 logo.
Macros and Type 1 fonts for Typesetting the Cherokee language with the Omega version of LaTeX (known as Lambda).
Attach superior figures to a font family
The package allows the attachment of an arbitrary superior figures font to a font family that lacks one. (Superior figures are commonly used as footnote markers.) Two superior figures fonts are provided--one matching Times, the other matching Libertine.
A "new" version of the karta cartographic fonts
A development of the karta font, offering more mathematical stability in Metafont. A version that will produce the glyphs as Encapsulated PostScript, using MetaPost, is also provided.